Cashier closing and till reconciliation: from opening the shift to approving the close
A cashier's closing matches what is in the cash drawer and card terminals at the end of a shift against the sales, returns and payouts the system recorded, method by method. The best way is the blind count: the cashier counts and enters what they counted without seeing what the system expects; the supervisor then sees the difference and approves or returns it, and the difference is closed in the books by a settlement entry. On a shared drawer, each cashier closes their part and the supervisor counts the drawer once for all.
What is a cashier closing and why does it matter?
The till is where cash moves most in a business, and the closing is the one moment when it is checked that what the system recorded actually arrived. At the end of each shift, the cash in the drawer, the card terminals' slips and the sales on credit are compared with what the system expects for each payment method, and the difference and its cause are recorded.
Regular closings do more than catch shortages; they catch errors early: a sale entered as card but paid in cash, a return not recorded, an expense paid from the drawer without a voucher. Each day a closing waits makes the cause harder to trace and turns a small clear difference into a murky balance at month end.
How is a shift opened and what is the opening float?
A shift starts by opening it in the system on a given till, with its opening float: the cash in the drawer before the first sale, usually small notes for change. The float is not a sale, but it is part of what should be in the drawer at closing; left unrecorded, it shows up as an overage.
It is clearest when the opening float is what the previous shift's closing left in the drawer, so shifts link up: what today closes with is what tomorrow opens with, and no cash enters or leaves the drawer without a document.
Watch sales after midnight on evening shifts: unless they are dated to the shift's opening day, one shift splits across two days in the reports and its closing no longer matches its day's sales.
What is a blind count and why doesn't the cashier see the system's figures?
In a blind count the cashier counts the drawer note by note and enters each method's total, without the system showing what it expects. The reason is simple: a cashier who sees the system expects SAR 4,250 tends to 'find' 4,250, may cover a gap from their own pocket or hide an overage, and management loses what the closing was meant to show.
Once saved, the comparison shows to whoever may see it, the supervisor or the accountant: what the system recorded, what the cashier counted, and the difference. Proof goes with the count: a photo of the card terminal's settlement slip and the vouchers for anything paid from the drawer. A closing approved on a figure with no proof does not hold up under review.
How is each payment method matched: cash, card and credit?
Each method has its own logic, and mixing them is what makes most phantom differences:
What is paid out of the drawer during the shift, petty expenses, a commission the cashier receives, a refund, lowers the cash the system expects, provided it is recorded with its voucher. Returns are shown apart from sales, each with its reason, so a large return does not vanish inside the day's net.
- Cash: a balance carried from shift to shift, so it is matched against the box's whole balance as its account statement reads up to the shift's day, not the day's sales alone.
- Card: counted afresh each day, so the day's card sales are matched against the terminal's settlement slip for that day, and later against the bank deposit.
- Credit: never enters the drawer, so it is matched against the list of credit invoices and their customers; best is allowing credit sales only to approved credit customers.
How are differences read and handled?
The difference is what was counted less what the system expects: positive is an overage, negative a shortage. Before treating it as real, look for the usual causes: a sale recorded under the wrong method (a cash shortage with a matching card overage), an expense paid but not recorded, an opening float not entered, an invoice left pending and never sent.
Set a clear policy in advance: what difference is settled without inquiry, who bears a recurring shortage, how an overage is treated (not returned to the cashier but recorded). Most of all, read each cashier's differences over weeks: a small difference recurring in the same direction deserves more attention than one large difference with a clear cause.
How is a drawer shared by several cashiers closed?
In many shops and restaurants several cashiers work one drawer in the same shift. Each cannot close the drawer alone, and one closing for everyone hides who sold what. The answer is to separate two things: each cashier's operations, and the drawer itself.
Each cashier closes their part at the end of their hours: their operations by method, what they paid out of the drawer and their credit sales, counted blind; their part is then locked and they sell no more in that shift, while it stays open for the others. At the end, the closing supervisor opens the shift's one closing, sees each cashier's column beside the system's figures, counts the drawer once for all and approves, approving every part with it.
All of this depends on each cashier signing in under their own name; a login shared between cashiers erases the line between them, and spoils each seller's commission with it.
What is a settlement entry and how does it close the difference in the books?
A closing shows the difference but does not correct it in the accounts. If the drawer holds SAR 500 and the system expects 450, the cash account in the books still reads 450 until an entry adds the difference to the box against an over-and-short account, or charges it to the cashier. That is the settlement entry.
After the settlement entry the closing must agree with the box's account statement: the balance after settlement is what was counted, and the difference is nil. That is the real test of a sound closing; a closing that says 'no difference' while the statement says otherwise means some entry went to the wrong place.
Who approves the closing and how is it corrected afterwards?
Separating who counts from who approves is the basis of cash control: the cashier counts, the supervisor reviews and approves, the accountant reads and settles. An approved closing is not changed by anyone's own decision; if an error appears after approval, it is sent back for correction on a written order from the person responsible for the accounts, corrected the same blind way, and the correction is kept on record.
Then comes the final lock: after it, a closing is neither edited, cancelled nor deleted. Without that point every closing can be rewritten, and past months' figures lose their worth.
How does Arkan close a cashier's shift?
In Arkan till sales save in the background so the cashier never waits on the server, credit is allowed only for credit customers, and a shift's sales can be dated to its opening day even past midnight. At closing one table shows a row per payment method: the opening amount from the last closing, the day's operations, then the closing amount with the system's, the supervisor's and the difference, then the proof attached. The count is blind, the system's figures show to those allowed to read them, and returns, payouts and commissions received from the drawer are shown apart and lower the cash expected.
On a shared shift each cashier saves their own closing blind and it locks; the closing supervisor sees a column per cashier, writes the closing amount for the whole drawer and approves. An «after settlement» column shows each method's balance as its account statement reads it: the box with its carried balance on its cost center, the card for its day, and «create settlement entry» makes the entry for the difference. After approval, the project's accounting head or management can send the closing back with a message to the supervisor, who corrects it blind and returns it; then the final lock.
Common questions
Why can't the cashier see the expected amount before counting?
Seeing it pushes towards matching the number instead of counting the drawer, hiding the differences the closing should reveal. A blind count makes the entered figure what is really in the drawer.
Cash is short and card over by the same amount. Why?
Usually a sale recorded as card but paid in cash, or the reverse. Fix the invoice's method if possible, or settle both differences together with an entry stating the cause.
Is cash matched against the day's sales only?
No. Cash is a balance carried between shifts and is matched against the box's whole balance. Card is matched against its day's sales, since it settles daily.
How do I close a drawer used by several cashiers?
Each cashier closes their part with a blind count of their operations, then the supervisor counts the drawer once for all and approves the whole closing. Each cashier needs their own login.
Can a closing be changed after approval?
Best only on a written order from whoever is responsible for the accounts, with a kept trail, after which it is locked for good.